DIGITAL TD CONTROLLER STANDARD INSTALLATION VERSION

DIGITAL TD CONTROLLER STANDARD INSTALLATION VERSION
Price: $1,980.00
with Free Shipping
Submit Price Match
Brand: NEXO
Product Code: DTD-IU
Availability: CALL TO ORDER

The DTD-I is a dedicated Installation version, with all connectors (except mini-USB) at the back on the barrier strip. There is no hardware control; everything is set up from a PC/Mac computer connected on the USB port, allowing the settings to be locked and thus preventing any accidental changes.

The DTD delivers advanced speaker control processing taken from the NEXO NXAMP in a compact, rack-mounting device. Providing sophisticated control over crossover, EQ and time-alignment along with speaker protection, the DTD is very easy to use, with automatic amplifier sensing and simple Sub Gain, Main Gain and Crossover Mode control available directly from the front panel (DTD-T touring version). The DTD combines efficient speaker processing with a flexible range of inputs including stereo balanced analog inputs, an AES input and a USB port enabling direct driverless audio playback from laptops, etc. An optional DanteTM input is also available.

DTD uses state-of-the-art audio processing to deliver high- precision EQ and Linear Acoustic Phase algorithms, phase- compatible with all PS and LS cabinets, along with other speakers in the NEXO range. High-end AD and DA converters and 64-bit/96kHz processing ensure an analog in-to-analog-out dynamic range greater than 112dB, with distortion kept to under 0.001%.

KEY FEATURES

  • Speaker controller for PS and LS series, providing digital processing from the NXAMP technology (Crossover, EQ, time alignment and speaker protection)
  • High-end balanced stereo analogue inputs, AES input, USB input and optionally Dante™
  • High-end balanced analogue outputs for PS (Stereo) and LS (mono sum)
  • Automatic amplifier sensing with no setting required from user
  • Dedicated Install version

SPECIFICATIONS

Sampling frequency and resolution

48/96 KHz, 64 bits internal processing precision

Signal delay

Less than 1 ms (analog in to out) on flat setup, compatible with NXAMP latency

Frequency response

20 Hz to 20 KHz, +/-0.5 dB (mains out), 20 Hz to 2 KHz +/-0.5 dB (sub out)

Total harmonic distortion

Less than 0.001% (mains out), less than 0.02% (sub out)

Dynamic range

112 dB (unweighted, mains out), 107 dB (unweighted, sub out)

Crosstalk / Channel separation

-100 dB (1KHz)

Indicators

Input signal/peak (green/red), amp in signal (green), speaker protect (yellow)

Display

White backlight graphical OLED display 96 x 16 pixels


FEATURES

ANALOG INPUTS CHARACTERISTICS

 

Number of channels

2 electronically balanced analog inputs

Connectors

2 x terminal block (3-pin / 2.54 mm pitch)

Sampling frequency and resolution

96 KHz / 24 bits

Max. input level / Input impedance

+22 dBU / 20 KOhms

ANALOG OUTPUTS CHARACTERISTICS

 

Number of channels

3 electronically balanced analog outputs

Connectors

3 x terminal block (3-pin / 2.54 mm pitch)

Sampling frequency and resolution

48/96 KHz, 24 bits

Max. output level / Output impedance

+ 22 dBU / 200 Ohms

AMPLIFIER SENSING INPUTS

 

Number of channels

4 floating electronically balanced high voltage analog inputs

Connectors

1 x terminal block (8-pin / 5.08 mm pitch)

Sampling frequency and resolution

48/96 KHz, 24 bits

Max. input level / Input impedance

+50 dBU (8000 Watts / 8 Ohms) / 364 KOhms

AES INPUTS CHARACTERISTICS

 

Number of channels

1 AES/EBU stereo digital input

Connectors

1 x terminal block (3-pin / 2.54 mm pitch)

Sampling frequency and resolution

44.1 to 96 KHz / 16, 20 or 24 bits

DANTETM INPUT CHARACTERISTICS (DTD-T-N)

 

Number of channels

2 x Dante channels

Connector

1 x RJ45

Sampling frequency and resolution

48-96 KHz / 24 bits

USB INPUT CHARACTERISTICS

 

Type

2 channels of USB audio

Connector

Female mini USB connector type B

Sampling frequency and resolution

48 KHz / 16 bits

Remote Control (DTD-T)

Mini USB

Remote Control (DTD-T-N)

Mini USB + RJ45

Dimensions (W x H x D)

480 (W) x 44 (H) x 65 (D) mm, 1U

Weight

1.3 Kg

Power supply voltage

90 V - 240 V 50/60 Hz

Power consumption

20 W max

Heat dissipation (per hour)

20 Kcal max

Operating temperature range

0°C - 40 °C

Storage temperature range

-20 °C - 60 °C